What are the measures to prevent continuous casting machine failureThe reliability of the continuous casting machine is the key to ensuring output and improvin
What are the measures to prevent continuous casting machine failure
The reliability of the continuous casting machine is the key to ensuring output and improving work efficiency. Any operation failure during continuous casting may cause downtime and affect the final quality. Therefore, we must pay attention to the correct operation process, and at the same time take all preventive measures, which has a great effect on safe production.
Measures to prevent continuous casting machine failure:
1. Copper mould tube manufacturers must strictly implement the shift system. When handing over the shift, the shift person must introduce to the successor the operating dynamics of the equipment on duty, the abnormal situation of the equipment operation, the change and development of the original equipment defect, the temperature change of the operating part, the failure and the handling situation, etc.
2, Strictly implement the operating license system. You must hold a power supply stop license for power outages, a stop fuel supply license for stop fuel supply, an operation license for starting equipment, an inspection license for handling equipment failures or overhaul equipment, and the operation license must be taken back. Unlicensed power supply, oil supply, start-stop equipment and maintenance are strictly prohibited.
3. It is strictly forbidden to overload the equipment. Do not exceed the rated load, pressure, temperature, current, voltage, speed and other rated value specified in the regulations or marked on the equipment nameplate.
4. Before starting the equipment, the rotating parts of the equipment, safety protection device, equipment lubrication, water, wind, gas and other pipelines must be carefully checked, and the equipment can be started after confirming that there are no problems. The alarm bell must be issued before starting the equipment.
shengmiao
Harm of too high temperature: when molten steel out of cooper mold, the billet shell is thin and easy to break out; The accelerated erosion of refractory can ea
shengmiao
1. The barrier function (mainly completed by the liquid slag layer) isolates the contact between air and molten steel, blocks the secondary oxidation of molten
shengmiao
In continuous casting, low corrosion resistance often occurs, which directly leads to uneven composition and will eventually affect the smelting quality. In or