Replacement steps of mold copper tube:1. Loosen the bolts between the lubrication plate, the upper sealing flange and the housing.2. Remove the top plate and l
Replacement steps of mold copper tube:
1. Loosen the bolts between the lubrication plate, the upper sealing flange and the housing.
2. Remove the top plate and lubrication plate (do not damage the O-ring inside).
3. Rotate the maintenance platform by 90-180°, and loosen the bolts between the lower bottom plate (or lower sealing flange) and the housing. Remove the copper tube and the key plate from the water jacket; remove the key plate to the left and right sides; slowly take out the copper tube.
4. Clean the joints and surfaces related to the copper tube of the mold to remove oil, scale and other debris.
shengmiao
Harm of too high temperature: when molten steel out of cooper mold, the billet shell is thin and easy to break out; The accelerated erosion of refractory can ea
shengmiao
1. The barrier function (mainly completed by the liquid slag layer) isolates the contact between air and molten steel, blocks the secondary oxidation of molten
shengmiao
In continuous casting, low corrosion resistance often occurs, which directly leads to uneven composition and will eventually affect the smelting quality. In or